- Make sure surfaces are clean and free from grease, dust, or loose material. If surfaces are wet, wipe off any standing water.
- Cut the tip of the cartridge, attach the nozzle, and trim it to a 5mm opening.
- Apply a continuous bead of Selleys Liquid Nails Exterior 350g along the length of the joist, stud, or batten. For wide surfaces, apply beads every 40cm.
- Place materials together and press firmly. Use nails, screws, or clamps to hold in place and ensure full contact across the bond area. You have up to 25 minutes to reposition after applying.
- Let the adhesive cure for at least 4 hours before removing any temporary fixings.
- For heavy-duty jobs, also use mechanical fasteners. Keep the area dry until the glue is fully set.
Note: Porous surfaces and cooler or more humid conditions may extend curing time.
Reviews
There are no reviews yet