Family Swim Centre Pool

Hey Lyn,
Here's the section from the instructions on Set Up

SET UP:
Depending on the size of the product, 2 or more adults are recommended for setup. Set up time may vary from 10 to 20 minutes excluding water fill time.

1. Find a flat, level lawn surface that is free and clear of stones, branches or other sharp objects that may puncture the pool liner or cause injury.

2. Move the product (in its package) to the selected site before inflating – do not inflate the product and drag it since it may result in leaks or damage.

3. Slowly unfold the product and inspect the product for rips, tears or punctures. Do not use if the product is damaged.

4. Lay the pool out as evenly as possible and close all drain plugs and/or exhaust valve caps if any.

5. Inflate the bottom air chamber first with a manual air pump designed specifically for inflatable products, and then the next chamber or chambers in sequence.

6. Fill the product with air until the surface is firm to the touch. If there is any straining at the seams, the product is over-inflated. If any seam begins to strain, immediately stop the inflation and release air to reduce the pressure until signs of stress on the seam are gone. Do not over-inflate or use high pressure air compressor since it may result in seam leaks.

7. Close and recess all inflation valve cap(s) securely by pushing down firmly on it.

8. Depending on the type/model of the inflatable pool, slowly fill with water:
a. Just below the horizontal line indicator printed on the inside of the pool’s wall, or
b. Just below the over-flow holes indicator on the inside of the pool’s wall, or
c. Just below the first top air chamber ring.